U-Tube/Shell and Tube Condenser, Vaporizer, Heat Exchanger. Customized Materials.

A heat exchanger is a system used to transfer heat between a source and a working fluid, it's most commonly used in heating or cooling process fluids and gases, it comes in many variations to meet process requirements in almost every industry or application. such as  chemical engineering, energy, transportation and more. 

Applications

    Heat exchangers are widely used in industry both for cooling and heating large-scale industrial processes. The type and size of the heat exchanger used can be tailored to suit a process depending on the type of fluid, its phase, temperature, density, viscosity, pressures, chemical composition, and various other thermodynamic properties.

In many industrial processes, there is a waste of energy or a heat stream that is being exhausted, heat exchangers can be used to recover this heat and put it to use by heating a different stream in the process. This practice saves a lot of money in the industry, as the heat supplied to other streams from the heat exchangers would otherwise come from an external source that is more expensive and more harmful to the environment.

Heat exchangers are used in many industries, including:

*All types can be designed and customized. Please feel free to contact me for more details!

 

Our Advantages

1) High heat transfer coefficient
Spiral wound structure, heat transfer tube bundle is 3~4 times of shell side, increase the heat transfer area; The material stays longer in the heat transfer tube, and the heat transfer is more sufficient. Using the Irvine turbulence chattering frequency principle, the spiral winding structure makes the hot and cold objects produce strong turbulence and the heat transfer effect is enhanced.

2) Occupy small space, low operating cost
Small size, lightweight, easy installation, and low maintenance costs.

3)Long service life
Designed and manufactured by special Materials, high temperature, and high-pressure resistance, long service life, high safety factory.

4)Low scaling tendency
Soothing and polishing inside of the tubes. Small shell diameter, high flow rate, reduce the thickness of laminar flow, which means makes the dirt not easy to precipitate and accumulate, enhances the heat exchange effect. 90 degrees Angle connection, so that the fluid all participates in heat transfer, no retention area, reduce the tendency of the structure.5) Design flow rate up to 5.5 m/s to allow the refrigerant to transfer heat and wash the wall.

5) Quality certificate and quality inspection department assure the high standard manufacturing process.
The quality inspection department runs quality control management through all key links in the production process. The quality assurance manual stipulates contract control, design control, material and component control, operation (process) control, welding control, and heat treatment control, as well as other control procedures and control points of each link. The company has set up non-destructive testing involving radiographic testing, ultrasonic testing, magnetic particle testing, penetrant testing, etc. The quality control management is decomposed and refined, and the entire production process is placed under strict monitoring and inspection.
 

                                                       Welding Technique                                                                                                                   Inspection

1. Carefully check the quantity and quality of equipment before packing.
2. Well packed by plastic wrap.
3. Iron Frame, Suitable for land transport and sea freight.
4. Fittings and spare parts are packed in a wooden pallet.
5. Add labels and shipping marks.

1. Delivery Terms: CIF, CFR, FOB, EXW, transport by air, by sea, by express DHL, FedEx, TNT, EMS, etc.
2. Payment Terms: Wire Transfer (T/T), Irrevocable L/C at Sight, etc.
3. Minimum Order Quantity (MOQ): 1Ton or 100Pcs per size.
4. Carefully check the quantity and quality of equipment before packing.
5. Good packed by plastic wrap. Iron Frame, Suitable for land transport and sea freight.
6. Fittings and spare parts are packed in wooden pallets.
7. Add labels and shipping marks.

 

Q: Are you a manufacturer or a trader?
We're a manufacturer with more than years of professional production experience.
Q: Can you accept OEM?
Yes, OEM is acceptable. Just pls provide us with the drawing or sample, we will production totally according to your requirements.
Q: Can you provide us with the design drawing?
Yeah, of course, we will provide you with the drawing after you paid or prepaid.
Q: Can your factory produce products according to our drawings?
Yes, we can. Most products can be customized, including the Logo on products.
Q: What kind of your packaging?
Neutral plywood or wooden box packaging or according to customer's requirements.
Q: How long is your delivery time?
Normally 30days after payment, and we promise we will deliver as soon as we can.