China Factory High Quality 1mm 2mm 3mm 4mm Alloy Monel 400 Nickel Metal Sheet/Plate

Manufacturing Process
Powered by state-of-the-art facility and technology, a totally computerized, end-to-end full automatic production system is operated. This allows to deliver high-quality and high-performance products to the needs of customers.
1. Hot Rolling
Slabs of titanium are rolled into black coils of highly refined thickness and shape before being made into white coils through heat treatment, pickling and finishing in the annealing and pickling plant to the needs of customers. White coils so produced are used for cold rolling and pipes.
2. Cold Rolling
Cold rolling is a rolling process in which the plastic deformation temperature is lower than the recovery temperature.
3. Annealing 
Annealing: A process of heat treatment of metals by heating them slowly to a certain temperature, holding them for a sufficient time, and then cooling them at a suitable rate (usually slow cooling, sometimes controlled cooling).
4. Plates
Slabs of titanium are rolled into products of the dimensions specified by the customer through heat-treatment and pickling process. Titanium plates are used by the heavy chemical industries that require corrosion resistance, such as petrochemicals, power plant facilities, semiconductors and special shipbuilding.

Characteristics of titanium plate:
1 Titanium plate is the surface of the oxide film is equivalent to a good wear-resisting hair separation agent, the use of titanium plate to save the separation agent so that the plate is easy to peel, avoid the process of pre-processing of the plate, titanium plate is half lighter than the copper plate. 2. The service life of titanium seed plate is more than 3 times that of copper seed plate, up to 10 to 20 years according to the operating conditions
3. The electrolytic copper prepared with titanium seed plate has a compact crystal structure, smooth surface, and excellent quality.
4. Because titanium plate does not need to smear separation agent, it can avoid the pollution of copper electrolyte.
5. Improve the capacity and reduce the production cost of electrolytic copper, so as to have better economic benefits.

Characteristics of nickel plate:
1. Nickel plating provides a unique combination of corrosion and wear resistance.
2. It can add brightness, lustre and appeal.
3. It also provides excellent adhesion properties for subsequent coating layers, which is why nickel is often used as an 'undercoat' for other coatings, such as chromium.

 

1) High heat transfer coefficient
Spiral wound structure, heat transfer tube bundle is 3~4 times of shell side, increase the heat transfer area; The material stays longer in the heat transfer tube, and the heat transfer is more sufficient. Using the Irvine turbulence chattering frequency principle, the spiral winding structure makes the hot and cold objects produce strong turbulence and the heat transfer effect is enhanced.

2) Occupy small space, low operating cost
Small size, lightweight, easy installation, and low maintenance costs.

3)Long service life
Designed and manufactured by special Materials, high temperature, and high-pressure resistance, long service life, high safety factory.

4)Low scaling tendency
Soothing and polishing inside of the tubes. Small shell diameter, high flow rate, reduce the thickness of laminar flow, which means makes the dirt not easy to precipitate and accumulate, enhances the heat exchange effect. 90 degrees Angle connection, so that the fluid all participate in heat transfer, no retention area, reduce the tendency of the structure.5) Design flow rate up to 5.5 m/s to allow the refrigerant to transfer heat and wash the wall.

5) Quality certificate and quality inspection department assure the high standard manufacturing process.
The quality inspection department runs quality control management through all key links in the production process. The quality assurance manual stipulates contract control, design control, material and component control, operation (process) control, welding control, and heat treatment control, as well as other control procedures and control points of each link. The company has set up non-destructive testing involving radiographic testing, ultrasonic testing, magnetic particle testing, penetrant testing, etc. The quality control management is decomposed and refined, and the entire production process is placed under strict monitoring and inspection.

1. Carefully check the quantity and quality of equipment before packing.
2. Good packed by plastic wrap.
3. Iron Frame, Suitable for land transport and sea freight.
4. Fittings and spare parts are packed in a wooden pallet.
5. Add labels and shipping marks.

 

 
JINJIAN GROUP was founded in 1996 as a high-tech enterprise with the highest A1 and A2 class pressure vessel manufacturing and design qualifications now. It is the earliest and largest manufacturer of special materials equipment in East China. As well as the base of special material equipment in China. Our company covers an area of 80000m², with 56000 m² of workshop area, 6000 m² of the warehouse area, and 600 m² of flaw detection room area. We have 46 engineers& technicians, 72 welders, for special pressure vessels. We have passed the ISO9001 / 14001 / 18000 certification. We have satisfied products, advanced detection measures, sound quality assurance systems, scientific management experience, a comfortable environment, and convenient transportation. We warmly welcome people with lofty ideals from all walks of life at home and abroad to guide us.

 

Q: Are you a manufacturer or a trader?
We're a manufacturer with more than years of professional production experience.

Q: Can you accept OEM?
Yes, OEM is acceptable. Just pls provide us with the drawing or sample, we will production totally according to your requirements.

Q: Can you provide us with the design drawing?
Yeah, of course, we will provide you with the drawing after you paid or prepaid.

Q: Can your factory produce products according to our drawings?
Yes, we can. Most products can be customized, including the Logo on products.

Q: What kind of your packaging?
Neutral plywood or wooden box packaging or according to customer's requirements.

Q: How long is your delivery time?
Normally 30days after payment, and we promise we will deliver as soon as we can.